++86-157-3193-8681/+86-311-6902-4816
You are here: HomeNews
News Video

HDPE bottle and the feature of hdpe raw material

Carrie Mar 27,2019 Share this post:

HDPE bottle refers to a medicinal plastic bottle produced by blow molding and injection molding process using HDPE (high density polyethylene) as the main raw material. It is non-toxic and tasteless; hardness, tensile strength and creep are better than low-density polyethylene; good wear resistance, electrical insulation, toughness and cold resistance; good chemical stability, insoluble at room temperature It is resistant to corrosion by acids, alkalis and various salts in any organic solvent; the film has low permeability to water vapor and air.


HDPE bottle

HDPE full name is High Density Polyethylene, high-density polyethylene is an opaque white waxy material, lighter than water, specific gravity of 0.941 ~ 0.960, soft and tough, but slightly harder than LDPE, but also slightly stretchable. It is resistant to acids and alkalis, resistant to organic solvents, and has excellent electrical insulation. At low temperatures, it still maintains a certain degree of toughness. Surface hardness, tensile strength, rigidity and other mechanical strengths are higher than LDPE, close to PP, tougher than PP, but the surface finish is not as good as PP.


white bottle with push and turn cap

The general HDPE has a melting point of 142 ° C and a decomposition temperature of 300 ° C; the injection molding temperature has a large adjustable range. When injection molding, the general use temperature is 180 °C - 230 °C; because it is olefinic plastic, it does not absorb water, it does not need to be dried during production, but for product quality, it can be dried at 60 °C for 1 hr to discharge floating water; Ethylene has a high melt viscosity and a small flow length ratio, and thin-walled products may lack gelatinization. Therefore, the gate and the flow path are relatively large; the product is easily electrostatically charged, and the surface is easily attracted. The shrinkage is 16 ‰; the overflow value is 0.05 mm.


child proof cap

HDPE bottles are mostly used for the packaging of pharmaceuticals such as oral solid preparations, capsules and tablets. As the pharmaceutical packaging, HDPE bottles are most important. According to the market faced by HDPE bottles, two different testing methods, YBB standard and USP standard, can be selected. The relative production process control and raw material control will be different.


Previous: The USP standard of HDPE bottle

Next: Injection pack for animal medicine

We're here to help!