You are here: HomeNews
News Video

How to judge the quality of the horse syringe

Carrie Apr 12,2019 Share this post:

Nowadays, there are many kinds of plastic syringe on the market, and the quality is different. How can we correctly identify the quality of the horse syringe? Now do the following brief analysis based on some of its characteristics:

horse syringe for oral paste

First of all, the current plastic syringe is mainly made of glass material and plastic material. The plastic horse syringe is gradually replacing the glass oral paste syringe. The main cost is lower, the safety is higher than that of the glass perfusion device, and it is not easy to be broken. The production process of the perfusion product itself is relatively advanced, and the infusion syringe is generally produced by an injection molding process. The products produced by the injection molding process are molded at one time without any scraps, and the products are accurate in size and uniform in weight.

Secondly, the sealing requirements of the plastic syringe are high. When selecting the perfusion device, the sealing property should be tested. Half of the water is injected into the syringe, the piston is inserted into the syringe, the protective cap is removed, and the residual air is removed. Block with the cap and apply an axial pressure of 30 N on the pusher plug inside the syringe through the push rod for 30 seconds. There should be no leakage at the cap seal and the piston seal.

Third, the syringe must be guaranteed to be sterility due to direct contact with the drug. Generally, the syringe should be produced in a clean workshop that meets national standards. In addition, in order to ensure sterility, if the veterinary drug manufacturer has higher sterility. Additional requirements for ethylene oxide sterilization or cobalt 60 irradiation sterilization are required.

Previous: How to ensure that the horse syringe sealing system is in good condition

Next: The stability test way of horse syringe

We're here to help!